Angular contact ball bearings for motors and lathes

angular contact ball bearing can bear large radial load mainly radial and axial combined load and torque load, limiting the axial displacement of the two sides of the shaft.Is mainly used for two-way axial displacement limit shaft and the shell parts of double row angular contact ball bearing can be skewed between inner and outer ring is limited, allowing Angle depends on the bearing internal clearance, bearing on the size, in the role of interior design, and the bearing force and moment, and the maximum allowable slope Angle should guarantee won't produce high additional stress in the bearing.If there is a tilt Angle between the inner and outer rings of the bearing, the life of the bearing will be affected, and the running accuracy of the bearing will be reduced and the running noise will be increased.Double row angular contact ball bearings generally use nylon cage or brass solid cage.Attention should be paid to the installation of double-row angular contact ball bearing. Although the bearing can bear two-way axial load, if there is a ball loading gap on one side, it should be noted that the main axial load should not pass through the groove side with a gap.When the bearing is used, it should be noted that the raceway on one side without the gap of ball loading should bear the main load.Double row angular contact ball bearing, oil pump, roots blower, air compressor, all kinds of transmission, fuel injection pump, printing machinery, planetary reducer, extraction equipment, cycloid reducer, food packaging machinery, electric welding machine, electric, square box, gravity type spray gun, wire stripping machine, axle shaft equipment, chemical machinery, testing analysis.