Machined Brass Cages Angular Contact Ball Bearings

Contact Now

Angular Contact Bearings have raceways in the inner and outer rings that are displaced relative to each other in the direction of the bearing axis. These bearings are designed to accommodate combined loads—simultaneously acting radial and axial loads. Single-row bearings accommodate axial loads in one direction only. Double-row bearings are basically two single-row bearings arranged back-to-back, but take up less axial space. They accommodate radial loads as well as axial loads in both directions.

Machined Brass cages are machined from cast or wrought brass and are unaffected by most common bearing lubricants, including synthetic oils and greases. Clean up using normal organic solvents.
Machined Steel cages are made of nonalloyed structural type steel to improve sliding and wear resistance properties.
PA66 is an engineering-grade thermoplastic made from polyamide. PA66 cages have high-impact strength, resist abrasion and wear, and absorb shock and energy.
PEEK, or glass fiber-reinforced polyetheretherketone is popular for demanding applications—high speed, high temperatures, or a need for chemical resistance. PEEK cages combine strength and flexibility, high-operating temperature range, high chemical and wear resistance, and good processability.

65 mm x 100 mm x 18 mm SKF 7013 ACB/P4A Machined Brass Cages Angular Contact Ball Bearings

178 mm 287 kN
2,300 rpm 28.6 Kg

15 mm x 45 mm x 25 mm INA ZKLN1545-2RS Machined Brass Cages Angular Contact Ball Bearings

0,6 mm 0,344 Kg
24 800 r/min 19 mm

65 mm x 100 mm x 16,5 mm NSK 65BAR10S Machined Brass Cages Angular Contact Ball Bearings

191 kN 5,78 Kg
7314 A-UD 150 mm

30 mm x 62 mm x 16 mm NTN 5S-BNT206 Machined Brass Cages Angular Contact Ball Bearings

360 mm 30 mm x 62 mm x 16 mm
500 45

130 mm x 200 mm x 31,5 mm NACHI 130TBH10DB Machined Brass Cages Angular Contact Ball Bearings

110 1.69 kg
140 kN Full Complement | Wi

160 mm x 240 mm x 48 mm SKF BTW 160 CM/SP Machined Brass Cages Angular Contact Ball Bearings

78 0.6
1470 kN NJ 18/750 MA

65 mm x 100 mm x 16,5 mm NSK 65BAR10H Machined Brass Cages Angular Contact Ball Bearings

11,13 mm 14,288
14,288 mm 65 mm x 100 mm x 16,5 mm

45 mm x 100 mm x 25 mm NSK 45TAC03AT85 Machined Brass Cages Angular Contact Ball Bearings

2,1 2
120 2 mm
1/9